Welcome back! Pick up where you left off.

Confirm your plan and zipcode

Select from 3 of our most popular plans for your zipcode

2 days free per week

Reliant Flextra Credits 24 plan

Get your 2 highest-use days a week FREE + $200 in bonus bill credits for extra savings.

Fixed rate

Reliant Secure Advantage 24 plan

Straightfoward plan with a locked-in energy charge.

For renters

Reliant Apartment 12 plan

Designed exclusively for smaller spaces.

Term

2 Months

Rate

Fixed

Weekend projects

Say you are already mindful of your day-to-day energy consumption, but you still aren’t seeing the savings you want. By following the tips in this section, you can take your home’s energy efficiency to the next level. Although some of these suggestions require a bit more time and money, with a little diligence and a few hours on the weekend, you can start to see incredible energy efficiency results. So throw on an old t-shirt and grab your toolbox — it's time to get down and dirty.

These home improvement projects are more involved than our quick fixes, so please exercise caution when entering your attic or other spaces with limited visibility and potential hazards.

For the difficulty, cost and energy savings ranking legend, see the efficiency guide overview page.

Weekend projects

These home improvement projects are more involved than our quick fixes, so please exercise caution when entering your attic or other spaces with limited visibility and potential hazards.

For the difficulty, cost and energy savings ranking legend, see the efficiency guide overview page.

Proper insulation to reduce waste of energy

It’s no secret that every energy-efficient home starts with proper insulation. From reinstalling attic insulation to filling in around doors and windows, proper insulation will ensure your home doesn’t waste energy as it compensates for shifts in temperature, humidity and other environmental changes. Insulation comes in many different forms, and improving insulation can sometimes be an endless chore. We will highlight a few areas where insulation is often lacking to help you decide where to zero in on your efforts.

Tip: Insulating your attic

Difficulty: 2

Cost: $$$

Energy savings: 4

One of the most effective ways of improving your home’s energy efficiency, both in terms of cost and results, is to add insulation to your attic space.^I

In the graphic to the left, you can see some of the most common locations where attic air leaks occur. Some of these potential issues can be combated with some DIY handiwork, while others will likely require the help of a contractor or insulation professional.

Before you do anything, you’ll want to check the current condition of your attic’s insulation. If you are experiencing drafty rooms, uneven temperatures throughout your home or high heating and cooling bills, then it’s already likely that your attic insulation could use improvement. One easy way to tell if your attic insulation is lacking is if the joists are showing.^IIExposed joists mean you should probably top off your current insulation. You can use a tape measure to check the depth of your insulation and then calculate the thermal resistance, known as the R-value, which measures how effective the insulation is. Use the table below from ENERGY STAR^® to measure the R-value — just plug in your measured depth.

Source: U.S. EPA via ENERGY STAR® (PDF, page 4)

Calculate the R-value of your insulation

What you see when you look at the insulation		What it probably is	Depth (inches)	Total R-value
Loose fibers	Light-weight, yellow, pink or white	Fiberglass	______	2.5 x depth
	Dense, gray or near white, may have black specs	Rock wool	______	2.8 x depth
	Small, gray, flat pieces or fibers (from newsprint)	Cellulose	______	3.7 x depth
Granules	Light-weight	Vermiculite or perlite	______	2.7 x depth
Batts	Light-weight, yellow, pink or white	Fiberglass	______	3.2 x depth

Once you know the quality of insulation you have in your attic, if you have any at all, you will then want to factor in your location and climate to determine how much insulation you need to add. These guidelines from ENERGY STAR are a good place to start.

For states with hot climates, such as the region stretching from the southeast across the south and into southern California, you will want an R-value of 30 to 60 if you don’t have existing insulation and an R-value of 25 to 38 if you already have an existing 3-4 inches of insulation.
If you live above the southernmost states, such as parts of the Midwest, you would want an R-value between 38 and 60 for uninsulated attics and an R-value of around 38 if you already have attic insulation.
As you move further north, into the upper Midwest and the Northeast, an R-value from 49 to 60 is best for uninsulated attics and an R-value between 38 and 49 for attics with several inches of pre-existing insulation.
If you are unsure about your need or specific climate, consult energystar.gov for specific details.

Source: Home Advisor

So you know what you need — now what? Different types of insulation have different R-values and different price points. Simple batting and rolls are the most traditional type of insulation and can be applied by any weekend warrior over the course of a day or so — just make sure you use the proper safety equipment! Otherwise, professional contractors can apply spray foam and other more efficient types of insulation.

In the chart above, based on information from Home Advisor, you will see that the more insulation you put down upfront, the more you will save in the long run. These numbers are based on a 1,500-square-foot house. The cost will also go up considerably if you hire professionals to do the work, so it's worth considering whether or not you can handle doing it yourself.

No matter how much of a project you want to take on, ensuring that your attic is properly insulated is guaranteed to deliver amazing energy-saving results and greatly boost your home’s energy efficiency.

Tip: Insulating walls

Difficulty: 3

Cost: $$$

Energy savings: 4

Improving the insulation in the walls of your house can be a much more difficult task, but that doesn’t mean the importance of proper wall insulation should be overlooked. You can easily check the type of insulation you have in walls by shining a flashlight behind an electrical outlet, but make sure you turn the power off first. You can pull out a bit of insulation, too, if it needs a closer inspection.

Once you know which kind of insulation is hiding between your walls, you have a few options available.

Source: Home Advisor

Pros, cons and cost of different insulation materials

Type	Where applicable	Installation method(s)	Advantages	Cost	R-value
Blanket: batts and rolls, fiberglass	Unfinished walls, including foundation walls Floors and ceilings	Fitted between studs, joists and beams	Do-it-yourself Suited for standard stud and joist spacing that is relatively free from obstructions Relatively inexpensive	30 cents per square foot	3.0-4.0 per inch
Loose-fill and blown-in cellulose	Enclosed existing wall or open new wall cavities Unfinished attic floors Other hard-to-reach places	Blown into place using special equipment, sometimes poured in	Good for adding insulation to existing finished areas, irregularly-shaped areas and around obstructions	30 cents per cubic foot	2.2-2.7 per inch
Sprayed foam and foamed-in-place (open cell)	Enclosed existing wall or open new wall cavities Unfinished attic floors	Applied using small spray containers or in larger quantities as a pressure-sprayed (foamed-in-place) product	Good for adding insulation to existing finished areas, irregularly-shaped areas and around obstructions	$1.2 per square foot	3.5-3.6 per inch

Source: U.S. Department of Energy

If you are hoping to update your existing home and improve your energy efficiency, you will most likely need to hire a contractor. Spray foam and blown-in insulation are really the only options when you need to insulate behind existing walls — at least, if you want to avoid serious renovation.^IIIAlthough a bit more expensive, spray foam and blown-in insulation are very effective at getting into small spaces and creating complete barriers.

Tip: Weather stripping and caulking

Difficulty: 1

Cost: $

Energy savings: 2

Even with sufficient insulation throughout the structure of your home, there are almost always cracks, fissures and gaps that need to be filled up and closed. The chart on the left lists the variety of different places where weatherstripping and/or caulk should be applied. The air-tight seal you can create will ultimately help reduce how hard your home has to work to maintain heating and cooling temperatures.

Weatherstripping is best suited for areas where moving parts are involved, most importantly around doors and windows.^IV
Weatherstripping will ensure a tight seal when you close doors and windows, where gaps are otherwise bound to exist. Weatherstripping comes in a variety of different shapes, sizes and varieties. The type you go with isn’t particularly important — most types are fairly durable and relatively cheap. However, like most things, weatherstripping will get worn out over time. Be sure to check and make sure that any existing weatherstripping is doing its job, especially if you start feeling drafts.

Caulking performs a similar function, but is best suited for stationary areas. Again, areas around windows and doors are the biggest culprits for leaks and drafts. Caulking around door and window frames and trim will help keep your home leak-free.

By keeping your home well insulated and tightly sealed, you can make your home exceedingly more energy efficient. When you limit the amount of work your heating and cooling systems have to do, you can potentially see big savings on your next energy bill.

Source: U.S. Department of Energy

Energy-efficient landscaping

You have probably discovered by now that improving a home’s energy efficiency primarily has to do with heating and cooling. Running heaters and air conditioners throughout the year can take a massive toll on your energy bill if you don’t adequately fine-tune your home. One of the many ways to curb the energy needs of your home involves landscaping, for which there are several different options to help improve energy efficiency in every region and climate.

Energy-efficient landscaping

Climate/Region	During cold months	During warm months
Temperate	Use the sun's warming effect Block winter winds with windbreaks (trees and shrubs) to the north and northwest	Shade home from the hot sun Channel summer breezes toward the home
Hot-Arid	Use the sun's warming effect	Shade home from the hot sun Naturally cool home with winds Cool air around home with plants
Hot-Humid	Use the sun's warming effect	Shade home from the hot sun, but use trees that still allow penetration of low-angle winter sun Channel summer breezes toward the home Avoid putting gardens or plant beds near the home if they require frequent watering
Cool	Block winter winds with dense windbreaks Let winter sun reach south-facing windows	Shade south and west from the summer sun

Source: U.S. Department of Energy

Tip: Planting trees

Difficulty: 3

Cost: $$

Energy savings: 2

Planting trees in key areas is one of the best ways to create shade and windbreaks for your home. According to the U.S. Department of Energy, shaded areas can be up to 6 degrees cooler during the summer, and carefully positioned trees can save up to 25% of the energy a household uses. Likewise, windbreaks can lower fuel costs during the winter. Together, if utilized correctly, trees can have a huge effect on your home’s energy efficiency.

Choosing the type of tree to plant is equally as important. Deciduous trees shade during the summer and then allow sunlight through during winter, making them perfect for temperate and hot regions.Planting deciduous trees to the south of your home will provide excellent shade while still allowing cooling breezes through. Planting trees to the side of your house will also create natural wind channels to further cool your house.

Evergreen trees, especially camphor trees which can grow up to 30m high, are better suited for cooler regions that need continuous shade or windbreaks. Evergreen trees to the north and northwest of your home will help stop chilling winds during the winter months.

Source: U.S. Department of Energy

Tip: Planting shrubs and other plants

Difficulty: 3

Cost: $$

Energy savings: 1

Placing certain plants and shrubs in key areas will also help protect your home from harmful environmental effects. You can plant plants around your home to cool the air, and you can also use them to bolster windbreaks. Shrubs and groundcover can cool the air before it reaches your home, and can also prevent snowdrifts from building up next to your home in regions with heavy winters. Trellises and fences can be added to further enhance the shade and windbreak opportunities around your home.

Tip: Trimming

Difficulty: 2

Cost: $

Energy savings: 1

Let’s say you already have landscaping in place, or maybe you prefer the existing landscaping around your home. Another way to get the most out of your trees and plants is to trim them back seasonally to allow the sun to reach your home during cold months and cool winds to reach your home during warm months. In the summer, be sure to water in the morning when the temperatures are cooler and evaporation rates are lower. You can also raise your lawn mower cutting height in the summer to allow longer blades of grass to shade each other and retain more water.

Pools and lowering your energy bill

If you own a pool, then you probably know how much work they can be. What you might not know is how much work your pool is doing all by itself — especially if you heat your pool, which requires lots of energy. We detail below how you can make your pool, and home, more efficient, with tips and suggestions that will allow you to keep enjoying those summer swims without footing an excessive energy bill.

Tip: Pool habits

Difficulty: 2

Cost: $$$

Energy savings: 3

Effect of pool energy efficiency upgrades

Condition	Energy Use (kWh/year)	Cost of Energy ($/year)	Energy savings
Standard pool	3,000	240	---
Installing smaller pump	1,800	140	40%
Reduced time (60%)	1,200	100	60%
Combined effect	720	60	75%

Source: U.S. Department of Energy

When it comes to saving energy with your pool, a few small habits will go a long way. One is to use a pool cover — which we will get into further down in the guide. Another option is also fairly obvious: simply run your pool pump for a shorter period of time. Although it doesn’t take a rocket scientist to understand that less runtime requires less energy, many people still run their pool pumps way longer than needed. As you can see in the chart above, using a smaller pump and running it for a reduced time can result in energy savings of up to 75%!^V Considering how much energy a pool can drain (no pun intended), that is lot of money back in your pocket. Another easy energy saving solution is to simply lower the temperature you keep your pool at, if you keep your pool heated. All of these simple habits together can help save you tons of money and energy in the long run, with hardly any sacrifice.

Tip: Choosing gas vs. electric

Difficulty: 3

Cost: $$$$

Energy savings: 4

Choosing the right pool heater can have huge energy-saving results down the line, and you may even want to replace your outdated system. As is the case with a lot of energy-saving tips, shelling out a little extra cash upfront can help you reap awesome savings in the future, in terms of both money and energy. Although electric heat pump pool heaters are generally more expensive to install, they offer tremendous benefits. The biggest benefit is that they are much more efficient than gas pool heaters that can waste tons of energy.^VI Furthermore, heat pump pool heaters last much longer. And if you really want to go above and beyond, you can spring for a solar-powered heater.

Annual savings: gas vs. electric pool heaters*

Efficiency	Annual cost	Cost w/5.0 COP	Heat pump savings
Gas pool heaters
55%	$584	$200	$384
60%	$535	$200	$335
65%	$494	$200	$294
70%	$459	$200	$259
75%	$428	$200	$228
80%	$402	$200	$202
85%	$378	$200	$178
90%	$357	$200	$157
95%	$338	$200	$138
Electric resistance heaters
100%	$1,000	$200	$800

*Based on an electric resistance heated pool, which costs $1,000 per year at an electric cost of $.085/kWh, and using a natural gas cost of $0.80/therm. A seasonal average coefficient of performance (COP) of 5.0 was used to determine heat pump savings.

Source: U.S. Department of Energy

Tip: Pool covers

Difficulty: 2

Cost: $$

Energy savings: 3

There are several ways to make heating your pool a more energy-efficient process. As you can see in this chart from the U.S. Department of Energy, the vast majority of energy loss from pools is due to evaporation. A simple, easy solution is to use a pool cover. There are several different varieties, each with its own cost and benefits, but really any option will greatly reduce energy loss and save you money. Simply open it up when you are ready to swim and close it when you are done — it’s that easy!

In hotter, more humid climates like Houston's, you may want a pool cover with a reflective option that will prevent the pool from getting too hot during the summer but still protect it from evaporation in the cooler winter months.

Improving air circulation to reduce energy usage

If you have followed the advice in this guide or your home already adheres to environmentally-conscious design principles, it’s likely that your home has a tight air seal free of drafts and air leaks. With this in mind, it is especially important to ensure proper ventilation and air flow. This will help prevent stagnant air from building up inside your home and will also support the heating and cooling efforts of your HVAC system.^VII As such, proper ventilation and air distribution in combination with appropriate insulation is a critical aspect of any energy-efficient home.

Tip: Proper ventilation

Difficulty: 3

Cost: $$$

Energy savings: 2

Pros and cons of different ventilation systems

System	Pros	Cons
Natural ventilation	Indoor air pollutants are dispelled with natural air flow through leaks and cracks	Inefficient; heating and cooling efforts are leaked out of the home
Spot ventilation	Handles indoor air pollutants at the source, such as with localized exhaust fans and vent hoods	Doesn't handle air pollutants in other areas of the home; only treats a few isolated areas
Whole-house ventilation	Provides controlled, uniform ventilation throughout the home	Requires more energy to run these more complicated systems

Source: U.S. Department of Energy

There are several types of ventilation systems in any given home, and many homes use a combination of these systems. What many homes are moving away from, however, is the use of natural ventilation. Although many older homes might rely on the natural ability of leaks and cracks to boost air quality, this leads to uncontrolled air flow.^VII When your home has uncontrolled air flow, you are letting expensive air conditioned and heated air seep out of your house, thereby wasting precious dollars you could have saved.

Whole-house ventilation is therefore the natural choice for any energy efficient home. It may require more energy upfront to run ventilation throughout a home, but ultimately, the ability to control the air flow will help you save plenty of energy and enjoy lots of savings on your energy bill.

Tip: Controlling air distribution

Difficulty: 2

Cost: $

Energy savings: 3

Air distribution is the forced movement of cooled or heated air throughout a home, whereas ventilation is just the entry and exit of air through the building. Both of these elements are related and both must work together in order to provide optimal heating, cooling and ventilation in the most energy-efficient way possible. Part of the issue with air distribution handlers, such as air conditioners, furnaces and ductwork, is that they themselves are often major culprits of air leaks and negative airflow.^VIIIThese air handling units are often placed in unventilated and uninsulated areas, such as attics and basements, where outside air is mixed with warm or cool airflow. This puts a strain on the air handlers and on the entire HVAC systems, as they are essentially working against themselves.

Of course, every home is different — but by creating a tight air seal, with proper ventilation and well-controlled air distribution, you can minimize the strain on your HVAC systems and thus increase your home’s energy efficiency.

Source: Smarter House

Tip: Air filters

Difficulty: 1

Cost: $

Energy savings: 1

In case you haven’t figured it out yet, minimizing the work that heating and cooling systems have to do is a major part of creating an energy-efficient home — and every little bit counts. As mentioned earlier in this guide, regularly changing your air filter is an important habit to develop if you want to maximize your home’s energy efficiency. Not only will your HVAC systems not have to work as hard, but it will also protect the air quality of your home.^IX

Sources

I U.S. Environmental Protection Agency. Seal and Insulate with ENERGY STAR. https://www.energystar.gov/ia/partners/publications/pubdocs/Seal_and_Insulate.pdf

II ENERGY STAR https://www.energystar.gov/index.cfm?c=home_sealing.hm_improvement_inspections

III U.S. Department of Energy https://energy.gov/energysaver/types-insulation

IV U.S. Department of Energy https://energy.gov/energysaver/air-sealing-your-home

V U.S. Department of Energy https://energy.gov/energysaver/installing-and-operating-efficient-swimming-pool-pump

VI U.S. Department of Energy https://energy.gov/energysaver/heat-pump-swimming-pool-heaters

VII U.S. Department of Energy https://energy.gov/energysaver/ventilation

VIII Smarter House http://smarterhouse.org/home-systems-energy/ventilation-and-air-distribution

IX U.S. Department of Energy https://energy.gov/energysaver/maintaining-your-air-conditioner

‹ Back to energy-saving quick fixes

Appliances and major projects ›

Welcome back! Pick up where you left off.

Confirm your plan and zipcode

Select from 3 of our most popular plans for your zipcode

2 days free per week

Reliant Flextra Credits 24 plan

Fixed rate

Reliant Secure Advantage 24 plan

For renters

Reliant Apartment 12 plan

How the average price per kWh is calculated

Log in

Electricity

Home solutions

Help & support

My account

Log in

Weekend projects

Weekend projects

Proper insulation to reduce waste of energy

Calculate the R-value of your insulation

Tip: Insulating walls

Pros, cons and cost of different insulation materials

Tip: Weather stripping and caulking

Energy-efficient landscaping

Energy-efficient landscaping

Tip: Planting trees

Tip: Planting shrubs and other plants

Tip: Trimming

Pools and lowering your energy bill

Tip: Pool habits

Effect of pool energy efficiency upgrades

Tip: Choosing gas vs. electric

Annual savings: gas vs. electric pool heaters*

Tip: Pool covers

Improving air circulation to reduce energy usage

Tip: Proper ventilation

Pros and cons of different ventilation systems

Tip: Controlling air distribution

Tip: Air filters

Sources